by Mike | Oct 8, 2024 | RPM Mini-Kits
The 2024 Mini-Kit, once again developed by Frank Hodina at Resin Car Works, is being provided to the first 100 registrants at RPM Chicagoland. George Toman shares his assembly notes below. 2024_RPM-Naperville_mini-kit_notes Extra mini-kit assembly info from...
by Mike | Nov 8, 2019 | RPM Mini-Kits
In 2019 the Mini-Kit was offered in HO and N scales. Frank Hodina worked on the conversion of an Accurail HO scale single sheathed boxcar into an Illinois Central prototype with a new set of ends and other assorted details. Mike Skibbe took inspiration from...
by Mike | Nov 8, 2019 | RPM Mini-Kits
In 2018, the Mini-Kit was once again offered in HO, N, S, and O scales. Frank Hodina conceived the HO scale kit as a conversion of an Accurail 40ft wood reefer model into an FGEX 40ft truss rod car. Working off his queue, Mike Skibbe developed conversion parts for S...
by Mike | Nov 8, 2019 | RPM Mini-Kits
The 2017 rendition of the Mini-Kit was offered in four different scales! First, Jason Kliewer’s 3D cad model of a Pullman Standard “Carbuilders” end was the basis for new resin ends in each scale. The ends were 3D printed, and then combined with...
by Mike | Nov 8, 2019 | RPM Mini-Kits
2016 marked the return of the Mini-Kit to RPM Chicagoland. The car was a conversion of the Fox Valley Models B&O M-53 wagon top boxcar into an earlier M-15k rebuild. The M-15k’s featured a notched side sill, while resin conversion parts were developed with...
Recent Comments